Isover insulation Cavity Wall Slab is designed to be installed during construction in the cavity between two masonry leaves in external walls. The product is a non-combustible, silicone-impregnated glass mineral wool slab, supplied in a variety of thicknesses, in dimensions compatible with conventional wall tie spacing.
The Isover Insulation Cavity Wall Slab is composed of high quality glass wool, which is bonded with a synthetic, thermo-setting resin, silicone impregnated, to form a strong yet resilient insulating slab, which is easy to handle, cut and install.
Each size is available with a different number of slabs in the pack.
50mm x 455mm x 1200mm (10.92m2)
75mm x 455mm x 1200mm (8.74m2)
100mm x 455 x 1200mm (6.55m2)
Eurowall Cavity
Eurowall Cavity is a closed cell, CFC and HCFC-free (zero ozone depletion potential), rigid polyurethane foam core faced, both sides, with a multi-layer coated aluminium foil. It has an exceptionally low thermal conductivity of 0.022 W/mK. Benefits of Eurowall cavity insulation boards.

Eurowall Cavity, in a wide range of thicknesses, will assist in meeting the appropriate Building Regulation standard with any form of cavity wall construction.
Quality.
Outstanding product quality manufactured to ISO 9001 Quality Systems.
Ozone friendly.
Zero ozone depletion potential
We keep 25mm and 50mm in stock.
Floor Insulation
Eurothane GP Board

Supplied in 2400mm x 1200mm boards, Recticel Eurothane GP insulation board is used to reduce the thermal transmittance of pitched roofs, timber-framed walls and floors. It is used in both warm and cold pitched roofs. Eurothane GP is an insulation board with a core of rigid polyisocyanurate foam faced on both sides with a bright, gas tight and multi-layered complex of kraft and metal foil. Manufactured to BS EN 13165. This product has BBA certification for use in Pitched Roof applications. λ = 0.022W/mK
Product Benefits - Flooring Applications.

Eurothane GP is a high performance rigid PIR foam board for use in ground and intermediate exposed floors.
Insulation savings.
It is possible to meet the new Building Regulation requirement in new housing with only 60mm of Eurothane GP refer to table on page 20.
Ideal for heated floors.
Heated floors are fast gaining in popularity due to their efficiency and comfort level. The use of Eurothane GP boards will ensure optimum system efficiency.
Available in sheets of
50mm x 2.4m x 1.2m
75mm x 2.4m x 1.2m
100mm 2.4m x 1.2m
Other thinkness's are available please phone 01244 660351 for a qoute.
Polystyrene (jablite)
Can be used in a variety of floor applications both domestic and industrial to satisfy the current building regulations U-value requirements. The most common are below a concrete slab, a screen or a chipboard. It is available in 25mm, 50mm and 100mm sheets at 2.4m x 1.2m.

Loft Insulation
Isover Spacesaver loft roll is a high quality thermal and acoustic insulating mat in roll form, perforated along the roll to allow the user to use full, half or third width options in roof spaces. The strong, resilient and flexible mats are supplied compression packed and are easy to cut and install. Isover Loft Insulation products are made from glass mineral wool, one of the most environmentally friendly insulants available, and are manufactured from silica sand, the earth's most abundantly occurring mineral and a sustainable, infinite resource.
Roll sizes
100mm X 1160mm X 9.17M = 10.64M2
150mm X 1160mm X 6.03M = 6.99M2